Electronic. Flexible. Secure.

ixalo fitting | RFID

The ixalo fitting | RFID is a design-oriented access solution with modular construction, which can be flexibly adapted to different door situations – ideal for interior areas such as office or service zones. Access control is contactless via RFID technology (MIFARE Classic® / DESFire®), programming is conveniently handled via the BKS KeyManager software. Versions with single-sided or double-sided electronics as well as various handle models allow maximum design freedom.

The fitting is also approved for use on fire and escape doors according to EN 179 / EN 1125. Thanks to its energy-efficient electronics, optional online connectivity, and a wide range of special functions, the ixalo fitting | RFID offers a future-proof solution for modern access management in commercial buildings.

ixalo | RFID is individually configured by authorized partners via our MKS system.

Technical Highlights

High energy efficiency with up to 70,000 locking cycles per battery charge – ideal for long-term use without frequent maintenance
Optical signaling immediately indicates whether access authorization is present – for maximum transparency at the door
Integrated event memory (can be deactivated if desired) for logging access events – for greater control and traceability

Numerous special functions such as day release, dual control principle, or EMA connection – individually adaptable to your security requirements
Contactless programming with programming device, RFID card, or radio – simple, fast, and without removing the cylinder
Supports common RFID technologies:
– MIFARE Classic®
– MIFARE® DESFire®

Specifications at a glance

Technical Data

Technical Data
General Description	Electronically couplable fitting (access point) Access control via SE or RFID transponder Management software - BKS KeyManager Contactless programming with management software and programming device Optional online programming via radio Coupling duration adjustable from 2 to 60 seconds Day release, permanently coupled Dual control principle EMA function (intrusion detection system) Multi-level battery warning
	5386 \| 5986 long plate half set (half set) 5387 \| 5987 long plate set 5388 \| 5988 long plate set, double-sided reading, also available with optional radio module for online systems
Dimensions	Dimensions: 260 × 38 × 20.5 [mm] (length × width × depth) Square spindle: depending on version 7 mm, 8 mm or 9 mm Backset E: 72, 92 mm for PZ or 74, 78, 94 mm for CHRZ Door thickness (DT): min. 38 mm to max. 98 mm Drillings: undrilled, PZ72, PZ92, CHRZ74, CHRZ78 or CHRZ94 Surface: matt stainless steel
Signaling	Acoustic and optical, see chapter 6.2 [52]
Durability	Endurance test according to EN 1906 (200,000 locking cycles)
Power supply	2× Lithium CR2 battery, 3 V Permitted battery types: - Duracell Ultra CR2 - Panasonic CR2 - Energizer CR2
Battery life	Technology \| SE: up to 120,000 locking cycles or 5 years standby at 20 °C Technology \| RFID: up to 70,000 locking cycles or 3 years standby at 20 °C No data loss when battery is empty Two-stage warning is activated in case of voltage drop
Time / Date	Buffering of the internal real-time clock during battery change max. 5 min
Transponder	SE transponder 5336 \| 5337 \| 5338 \| 5339 RFID transponder 5931 \| 5932 \| 5934 \| 5935 \| 5937 \| 5938
Master	SE transponder 533x with access authorization for the respective access point System master card 5930 for RFID
Data transmission	Technology \| SE: - Capacitive: 125 kHz Technology \| RFID: - MIFARE® DESFire® (min. 2 kB free memory required on transponder) - MIFARE Classic® (1 kB and 4 kB transponder) Data is AES-128 encrypted
Radio interface (optional)	Frequency: 868 MHz Range: up to 5 m Encryption: AES-128
Memory capacity	30,000 transponders (offline / online) 64,000 transponders (data on transponder) 2,500 events 128 time zones 50 special days 50 special day periods
Environment	Operating temperature: -20 °C to +60 °C Storage temperature: -25 °C to +70 °C Relative humidity: up to 95% at 40 °C, non-condensing Corrosion protection: EN 1670 class 3 (high resistance = 96 h corrosion test) Protection class: IP30 according to EN 60529 Suitable for indoor use with predominant humidity below 75%
Certifications	DIBt – General building authority approval (abZ) Approval No.: Z-6.100-2593 EN 1634-1 Fire protection FS30 or FS90 EN 1906 Locks and building hardware – door handles and knobs – requirements and test methods 3 \| 7 \| - \| 0 \| 1 \| 3 \| 0 \| B [variants without fire protection] 3 \| 7 \| - \| B \| 1 \| 3 \| 0 \| B [variants with fire protection] 1 \| 6 \| - \| 0 \| 1 \| 3 \| 0 \| B [variants with 7 mm square spindle] EN 179 Locks and building hardware – emergency exit devices with handle or push plate for doors in escape routes EN 1125 Locks and building hardware – panic exit devices with horizontal operating bar for doors in escape routes

Variants of the ixalo fitting | RFID – one solution, many possibilities

ixalo fitting | RFID full set

Design-oriented complete solution for interior and exterior doors – flexible, secure, and easy to install.

ixalo fitting | RFID double-sided reading

Ideal for areas requiring access from both sides – maximum control with full operating comfort.

Configure products of the ixalo | RFID series

Exclusive for authorized partners.
Help/information about our MKS system.

Downloads

Download catalogs and brochures here free of charge:

Overview of service offerings

Find the right support quickly!

Receive expert support, find the right dealer near you, and download important documents and instructions directly – quickly, easily, and reliably.

Service

Contact our service directly for professional support!
Our experienced team is at your side with advice and assistance – reliable, competent, and solution-oriented.

To Service